How to maintain the drill bit?

Drill bits are a type of hardware tool often used in the modern construction industry. With drill bits, some small drilling and installation work in the home becomes particularly simple, but the quality of the drill bit and the stability of its performance determine its use effect to a certain extent. Therefore, if you want to achieve better drilling effects during the use of the drill bit, you must pay attention to its maintenance during the use of the drill bit. How to maintain the drill bit during use? Let's take a look at the editor's tips!

1. When drilling steel parts, please ensure sufficient cooling and use metal cutting fluid.

2. Good drill rod rigidity and guide rail clearance can improve drilling accuracy and drill bit life.

3. Please ensure the flatness and cleanliness between the magnetic seat and the workpiece.

4. When drilling thin plates, the workpiece must be reinforced. When drilling large workpieces, please ensure the stability of the workpiece.

5. At the beginning and end of drilling, the feed rate should be reduced by 1/3.

6. For materials that produce a lot of fine powder during drilling, such as cast iron and cast copper, you can use compressed air to help remove chips instead of coolant.

7. Please remove the iron chips wrapped around the drill body in time to ensure smooth chip removal.

Of course, the above only describes how to maintain the drill bit during use. When the drill bit is not used for a long time, you should also pay attention to its maintenance to prevent it from rusting due to long-term non-use.